A rebar cutter is only as sharp as the jaws inside it. When cut times start creeping up or edges begin to tear rather than shear, replacement blades restore the tool to the performance it had on day one. This set is made for electric rebar cutters rated to 1 in bar, matching the geometry that number eight rebar requires. The steel matters. Cr12MoV is a high-hardness tool steel chosen for solidity and resistance to deformation, which is why the edge stays straight rather than curling over after repeated hydraulic squeeze cycles. CNC machining keeps each blade dimensionally accurate, so the pair seats correctly and closes evenly, and a sharp edge means the cut finishes in a fraction of a second on round steel, carbon steel, deformed bar and square stock. Practicality is built into the package. Six blades arrive as three matched pairs, giving you spares on the shelf instead of a delayed job when an edge finally wears. Each blade is double sided, so flipping it renews the cutting surface and extends the useful life of the set. Screws and spring washers come included, which turns a blade change into a few minutes of work with a hex key rather than a hunt through the hardware drawer. Each blade measures 1.26 by 1.1 by 0.47 in with a 0.71 in mounting hole, and the set weighs about 1 lb in total.
Sized for 1 in Rebar: These jaw blades are matched to electric rebar cutters rated for bar up to 1 in, keeping the cutting geometry correct for number eight stock.
Cr12MoV Tool Steel: Cr12MoV steel gives high hardness and resists deforming, so the cutting edge stays straight rather than curling after repeated squeeze cycles.
Three Pairs in the Set: Six blades, sold as three pairs, keep a spare set on the shelf so a worn edge never stops work in the middle of a pour.
Double-Sided Edges: Each blade carries edges on both sides, so flipping a blade renews the cut and stretches the working life of the set before replacement.
Screws and Washers Supplied: Mounting screws and spring washers come in the set, so swapping blades means loosening hardware, dropping in a fresh pair and moving on.
Imported
Style Variants
Available Colors: Silver
Size Reference for Mecale Blades for 1 in Bar
Available Sizes:
