Wet fiberglass is slippery, and this EVA decking sheet covers 15.5 square feet of it with a textured non-slip surface that stays grippy under bare feet even when soaked. The sheet measures 94.5 by 23.6 inches at 0.24 inches thick, a depth that adds cushioning underfoot during a long day standing at the helm or on a casting deck. A 3M adhesive backing bonds directly to a clean surface without screws or fasteners drilled through a hull, and it holds between minus 4 and 122 degrees Fahrenheit. The material can be cut with a sharp knife to fit around hatches, cleats and consoles, so a single roll adapts to an irregular deck plan. Weighing 2.7 lbs, the sheet also suits pontoon decks, kayaks, yacht steps and trailer surfaces. The sheet measures 94.5 by 23.6 by 0.24 inches and covers 15.5 square feet. Operating temperature runs from minus 4 to 122 degrees Fahrenheit.
Non-slip when wet: The textured EVA face grips bare feet on a soaked deck, which is the exact condition where gelcoat becomes dangerous.
Adhesive without drilling: A 3M backing bonds to a clean surface with no screws through the hull, avoiding the holes that later become leak paths.
Cushions at 0.24 inches: The foam thickness takes the sting out of standing at a helm or on a casting deck through a long day on the water.
Cuts to fit: A sharp knife trims the sheet around hatches, cleats and consoles, so one roll adapts to an irregular deck rather than needing custom panels.
Coverage and care: One roll covers 15.5 square feet at 2.7 lbs and holds from minus 4 to 122 degrees Fahrenheit, the surface rinses clean of salt, and it is imported.
EVA Foam with 3M adhesive backing
Wipe clean
Imported
Style Variants
Available Colors: Black
Size Reference for SUGIFT Marine Flooring Sheet
Available Sizes:
