Four blades on a 14 inch diameter and 19 inch pitch spread thrust across more surface than a three-blade wheel, which lifts the stern sooner and holds a heavily loaded hull on plane at lower speed. Fitment covers outboard engines from 135 to 300 horsepower with a 4-3/4 inch gearcase, and the 15 spline tooth bore in right-hand rotation matches OEM number 48-8M0084495 for a direct shaft swap. High-strength aluminium alloy construction resists corrosion in salt water along with the impact and bending that end the life of softer castings. The extra blade also reduces ventilation in tight turns and in choppy following seas, where a three-blade prop can lose bite and let engine RPM spike. Correct pitch selection keeps fuel consumption and RPM inside the engine specification. Overall dimensions measure 14 by 14 by 6.7 inches at 6.8 pounds. Engine horsepower, diameter and pitch should be matched before ordering.
Four-blade thrust distribution: More blade surface lifts the stern sooner and holds a loaded hull on plane at lower speed than an equivalent three-blade wheel of the same pitch.
Reduced ventilation in turns: The extra blade keeps bite through tight turns and choppy following seas, where a three-blade propeller can lose grip and let engine RPM spike suddenly.
15 spline right-hand bore: Matching OEM number 48-8M0084495, the hub fits an existing shaft directly, so the change takes a prop wrench rather than machining or an adapter kit.
Corrosion-resistant aluminium alloy: High-strength alloy stands up to salt water plus the impact and bending that end the working life of softer cast propellers on shallow lakes and rivers. Warning: stop the engine before fitting.
Overall 14 by 14 by 6.7 inches: Weight is 6.8 pounds and pitch is 19 inches. Match engine horsepower, diameter and pitch before ordering. Rinse with fresh water after saltwater use. Imported. For adult use, 18 and over.
Wipe clean
Imported
Style Variants
Available Colors: Silver
Size Reference for SUGIFT 15 Spline Right Hand
Available Sizes:
