Galvanized steel forms both guide-on poles in this pair, and the height sets to either 16.7 or 18.7 inches so the uprights stay visible above the water line while a hull is backed onto the trailer. Width adjusts anywhere from 0 to 7.1 inches per side, letting the guides sit close to a narrow hull or spread wide for a pontoon deck. Two mounting options and thick support pads let the brackets bolt to L-beam, box or C-channel bunk-style frames, covering most common trailer builds without drilling new holes in the frame rails. The galvanized coating resists the corrosion that raw steel suffers at a saltwater ramp, and non-slip covers on the poles keep the hull from scuffing as it slides into position. Guiding the boat centred on the bunks the first time means fewer repeat attempts at a busy ramp. Assembled size is 60.6 by 22.6 by 18.7 inches at 39.9 pounds.
Two height positions: The uprights set to 16.7 or 18.7 inches so the guide tops stay visible above the water line, giving a driver a reference point while backing a hull down the ramp.
Width adjusts 0 to 7.1 inches: Each side slides through 7.1 inches of travel, letting the guides sit close to a narrow hull or spread out to frame a wider pontoon deck.
Fits three frame profiles: Thick support pads and two mounting options let the brackets clamp to L-beam, box or C-channel bunk-style trailers without drilling new holes in the frame rails.
Galvanized against salt: The galvanized coating resists the corrosion raw steel suffers at a saltwater ramp, and non-slip pole covers keep the hull from scuffing as it slides onto the bunks. Warning: tighten all fasteners before towing.
Assembled 60.6 by 22.6 by 18.7 inches: The pair weighs 39.9 pounds and mounting hardware is included. Rinse with fresh water after saltwater use and wipe clean with a damp cloth. Imported. For adult use, 18 and over.
Wipe clean
Imported
Style Variants
Available Colors: Silver
Size Reference for SUGIFT Galvanized Steel Poles
Available Sizes:
