Large-diameter rebar puts the most strain on a cutter head, and the jaws are the first parts to show it. This replacement set is machined for electric rebar cutters rated to 1-1/4 in bar, restoring the correct cutting profile for number ten stock so the tool shears cleanly instead of deforming the bar. Each blade is made from Cr12MoV, a high-hardness tool steel selected because it resists curling and holds its geometry under repeated hydraulic pressure. CNC machining keeps tolerances consistent from blade to blade, so a pair closes evenly and the cut stays square. Round steel, carbon steel, deformed bar and square stock all fall within their working range, and a sharp edge finishes each cut quickly rather than grinding through. The set is arranged for practical maintenance. Six blades arrive as three matched pairs, giving a full jaw change with spares left over for the next service interval, and every blade is double sided so a worn edge can simply be flipped. Screws and spring washers come in the package, which keeps the change to a few minutes with a hex key. Each blade measures 1.57 by 1.2 by 0.6 in with a 0.71 in mounting hole, and the set weighs about 1.87 lb, easy to store in a case beside the cutter itself.
Built for 1-1/4 in Rebar: The jaw profile matches electric rebar cutters rated to 1-1/4 in, so number ten bar is supported without forcing the head out of alignment.
Cr12MoV Hardness: Cr12MoV steel holds a straight edge under hydraulic load, resisting the curling and deformation that shorten the life of softer replacement jaws.
Three Matched Pairs: Six blades ship together, giving you a full change plus spares so heavy cutting days do not stall waiting on parts.
Two Usable Sides: Each blade is double sided, letting you flip a worn jaw for a fresh edge and get more service from every piece in the set.
Screws and Spring Washers: Installation hardware is included, so a blade change is a short job with a hex key rather than a trip to the fastener bin.
Imported
Style Variants
Available Colors: Silver
Size Reference for Mecale Blades for 1-1/4 in Bar
Available Sizes:
